Operating the 910 Digital Audio Preamplifier
7Operating the 910 Digital Audio Preamplifier
You can operate your 910 using:
•The front panel buttons, (see Section 7.1)
•Serial commands via the
•
7.1Using the Front Panel Buttons
The 910 is operated from its front panel buttons as follows (for an explanation of the front panel button functions see Table 2):
1.Select an input from 1 to 4 by pressing its INPUT button. The selected input appears in the display.
2.Select a function by pressing its appropriate button. The selected input and function appear in the display.
3.Adjust the function using the adjustment knob.
7.1.1Using MIX
To mix multiple inputs (any or all) press the MIX button and press any INPUT desired. Each selected input lights.
7.1.2Using Loudness
Pressing LOUDNESS activates and deactivates the loudness function.
7.1.3Using Talkover
To use the talkover function, press TALKOVER. The microphone on INPUT 4 activates. The audio fades out when the microphone input is loud enough and fades back in when the microphone is silent for approximately 1.5 seconds.
7.1.4Using Store
Up to four current settings can be stored in four presets. To store a preset: press STORE, it flashes. Choose a preset location by turning the adjustment knob or pressing an INPUT button. Press STORE again to save the preset.
7.1.5Using Recall
To recall any of the four presets: press RECALL, it flashes. Choose a preset location by turning the adjustment knob or pressing an INPUT button. Press RECALL to activate the preset.
15
