Kramer Electronics COBRA R500-2, COBRA R500A Connections on the Video/Serial Transmitter

Setup and Installation

4.3 Connections on the Video/Serial Transmitter

The single-port units with audio support video and serial signals over CAT 5 cable. The serial signal is 3 wire TX, RX, GND serial. Figure 3 shows the Kramer Cobra transmitter with serial Transmitter connections, and Figure 4 shows the Cobra R500-2Video-RS-232 receiver. See Appendix A for cable pinouts of the Cobra R500-2.

Figure 3: Transmitter Connections

(Note: Both serial connection types are shown, but only one is used depending on the model and settings).

Figure 4: Cobra R500-2 Video-RS-232 receiver Connections

5