6.Connect the PT-5Tand the PT-5Rtogether, using TP cable, via the RJ-45 connectors on the rear panel of both devices.
7.Connect the power adapter to the 5V DC connector on the rear panel of the PT-5Tor the PT-5Rand to the mains electricity.
Note: Only one of the devices needs to be connected to a power adapter.
Figure 4: Connecting the PT-5T/R
4.3Using the PT-5T/R IR Extender/Repeater
Use the remote control specific to the device to operate any of the devices connected via infrared to the PT-5Tand PT-5R. (Use the machine’s original remote control or a universal remote control.) The infrared signal from the remote control is transmitted:
∙From the PT-5Tto the device under control or
∙From the PT-5Tto the PT-5Rvia the TP cable, and from there to the device under control
PT-5T/R - Connecting and Using the PT-5T/R IR Extender/Repeater | 7 |
| |