Kramer Electronics VM-20HD user manual

Connecting the VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier

6Connecting the VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier

To connect the VM-20HD, as the example in Figure 2 illustrates, do the following1:

1.Connect an HD-SDI/SD-SDI video source (for example, an HD/SD SDI camera) to the CHANNEL A VIDEO IN BNC connector.

2.Connect the CHANNEL A LOOP BNC connector to the CHANNEL B VIDEO IN BNC connector.

3.Connect up to2 20 VIDEO OUTPUT BNC connectors to the appropriate HD/SD SDI video acceptors (for example, HD/SD SDI displays).

4.Connect the power cord (not illustrated in Figure 2).

Figure 2: Connecting the VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier

1 Switch OFF the power on each device before connecting it to your VM-20HD. After connecting your VM-20HD, switch on its power and then switch on the power on each device

2 You do not have to connect all the outputs, connect only those that are required and leave the other output(s) unconnected

7