Kramer Electronics VP-4x8AK - page 17

Using the VP-4x8AK
13
13
6.2 Connecting the Balanced/Unbalanced Stereo Audio Output
This section illustrates how to wire:
• A balanced output connection, see Figure 4
• An unbalanced audio output, see Figure 5
Figure 4: Connecting the Balanced Stereo Audio Output
Figure 5: Connecting an Unbalanced Output
6.3 Connecting a PC or Controller to the RS-232 Port
You can connect to the VP-4x8AK via an RS-232 connection using, for
example, a PC. Note that a null-modem adapter/connection is not required.
To connect to the VP-4x8AK via RS-232:
• Connect the RS-232 9-pin D-sub rear panel port on the product u nit via a
9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5
need to be connected) to the RS-232 9-pin D-sub port on your PC