Controlling via the Embedded Web Pages
31
31
Figure 23: Selecting a Preset
2. Click the Preview button to view the current setup stored in Preset 7.
3. Make sure the matrix is set to the desired configuration. If not, set it as required.
4. Click Stor e.
The following window appears:
Figure 24: Save Preset Message
5. Click O K.
The new In/Out configuration is stored in Preset 07.
To recall a preset configuration:
1. Select the desired preset number from the Preset drop-down list1
2. Click and hold the Preview button to view the selec te d Pres et an d then relea se .
(for example,
Preset 03):
3. Click Recall.
The following window appears:
Figure 25: Load Preset Message
1 When selecting a preset that contains a configuration, the Recall button changes from gray to dark blue