Your VP-725xl Presentation Switcher / Scaler

7

7

Table 1: Front Panel VP-725xl Presentation Switcher / Scaler Features

# Feature Function
1
INPUT
SELECTOR
Buttons
YC Selects one of the s-Video (Y/C) sources (from 1 to 4)
2 CV Selects one of the CV sources (from 1 to 4)
3 UXGA Selects one of the UXGA sources (from 1 to 4)
4 HDMI Selects one of the HDMI sources (from 1 to 4)
5 USB Press to select the USB
1
source
6 COMP Selects one of the component video sources (from 1 to 4)
7
MODE
SELECT
Buttons
VIDEO
GROUP
Select the Video group operation mode; within each group, select which
input (from 1 to 4) to switch to the output. The selected inp ut button
within each group is illuminated (see section 7.1)
8 SCALER Select the Scaler operation mode; press an input button (1 of 20), to
select the input to be scaled at the SCALED OUTPUTS. The selected
input button illuminates (see section 7.1)
9 LCD Status Display Displays the status
10 POWER Switch Illuminated switch for turning the unit O N or OFF
11 IR Receiver / LED Green when ON; red when OFF2
12 FREEZE Button Freezes the output video image
3
13 PIP Button Selects the picture-in-picture function3,4
14 MENU Button Displays the OSD Menu screen (or returns to t he previous level in the
OSD screen)
15 ENTER Button Moves to the next level in the OSD screen
3
Press for about 3 seconds to lock/unlock the front panel bu ttons
16 UP Button Moves up one step (in the same level) in the OSD scree n
3
17 - Button Decreases the range by one step
3
18 DOWN Button Moves down one step (in the same level) in th e OSD screen
3
19 + Button Increases the range by one step
3
20 OSD ON Button Activates/deactivates access to the OSD Menu3, 5
21 USB Connector Connect to a USB drive to read JPEG files
Figure 2 and Table 2 define the rear panel of the VP-725xl:
1 JPEG files on a USB memory stick, up to a maximum size of 2048x1536
2 OFF in this case means that the outputs and the front-panel are disabled
3 Applicable to the Scaler outputs only
4 See section 7.2
5 The OSD ON front panel button is activated (illuminated) by default, and pressing the MENU front panel button (or the
MENU key on the infrared remote control transmitter (see Figure 21)) displays the OSD Menu. To prevent OSD display,
press the OSD ON front panel button (or the OSD key). The front panel button will no longer be illuminated, and the front
panel LCD now operates independently of the OSD (when the OSD is OFF, the LCD is still operational)