Kramer Electronics VP-725xl Figure 14 and Table 11 define the Setup screen.

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring and Controlling the VP-725xl
26
8.1.6 The Setup Screen
Figure 14 and Table 11 define the Setup screen.
Figure 14: Setup Screen
Table 11: Setup Screen Functions
Setting Function Selection/Range Default
Save Save a profile From Profile 1 to Profile 8
Recall Recall a profile From Profile 1 to Profile 8
Slideshow Set speed for slide show (see section 8.1.7) Min, Low, Mid, Long, Max,
Off
Off
Frame Lock Locks the vertical refresh rate of the output
to that of the input1,2
On/Off Off
Auto Image Automatically adjust and align the picture
each time one of the UXGA inputs is
selected or if the UXGA input resolution has
changed
Manual, Auto Manual
Switching
Mode
Select seamless switching (fade-through-
Black) or fast switching which is faster but
may cause glitches on the output (applies
only when switching between analog inputs)
Seamless, Fast Seamless
Factory Reset Reset your VP-725xl to its preset default
settings
Confirm, Yes, No
Advanced
Setup
Open the advanced setups (see Figure 15) Mode Set (see Table 12)
OSD (see Table 13)
Misc. (see Table 14)
Input (see Table 15)
Output (see Table 16)
1 Note that seamless switching is not possible when working in the Frame Lock mode unless all sources are frame
synchronized
2 In cases where the output resolution can support the vertical refresh rate of the input, the output refresh rate will change
according to the input refresh rate