Kramer Electronics VS-30FW Step 1: Check whats in the box, VS-30FW Quick Start Guide, Step 2: Install the VS-30FW Step 3: Connect the inputs and outputs, Step 4: Connect the power

Step 1: Check what’s in the boxVS-30FW Quick Start GuideStep 2: Install the VS-30FWStep 3: Connect the inputs and outputs

Mount the machine in a rack (using the RK-2 TB rack adapter) or place on a table.

This page guides you through a basic inst allation and first-time use of y our .

For more detailed information, see

VS-30FW

the user manual. You can download the latest

manual at .

VS-30FW

http://www.kramerelectronics.com

Save the original box and packaging materials in case your Kramer

product needs to be returned to the factory for service.

Always switch off the power on each devic e before connecting it to your . VS-30FW

For best results, we recommend that you always use Kramer high-performance cables to

connect AV equipment to the .VS-30FW

The FireWire 800/1394b Repeater/HUB

1 12V DC power adapter (12V, 500mA)

VS-30FW

4 rubber feet and mounting bracket

1 Quick start sheet

1 User Manual

FireWire® cable (C-FM9/FM9-3)

PC (via FW) Video

Camcorder

Step 4: Connect the power

Connect the 12V DC power adapt er to the and plug the adapter into the mains

electricity.

VS-30FW

Hard Drive

Each FireWire device can derive its power in one of two ways:

VS-30FW

Independently, by connecting each FireWire device to its own power supply, while the

is connected to the external 12VDC (12V, 500mA) po wer supply.

Via the that is connected to an external powerful po wer supply: the 12VDC

(12V, 2.1A) (optional with the ). In this case, each of the (u p to) 3 FireWire devices

can derive its power (up to 1A per port) from the respective FireWire port.