5.KRAMER VS-5X4 MATRIX

This section shows you all of the controls and connections of your switcher. Understanding these helps you realize its full power. The switcher is equipped with RS-232 Connector (for PC Control) and the connector wiring is described later on.

The Kramer VS-5x4is a high performance 5x4 vertical interval matrix switch for composite video and stereo audio signals. It is a true matrix, allowing the user to route any input to any or all outputs simultaneously. Since the VS-5x4switches during the vertical interval, transitions are glitch-free when sources share common reference sync. Audio signals are always switched together with the corresponding video signal, and the large LED display makes it easy to see the current settings. Each audio output may be configured to have 0, 2, 4 or 6dB gain by using the front panel switches or RS- 232.

Like most Kramer switchers, front panel buttons or RS-232 serial commands can control the VS-5x4. For applications requiring remote control via a Windows-based personal computer, Kramer’s new K- Switch software is provided at no additional cost. It is easy to use, dependable, rugged, and fits in one vertical space of a standard 19” rack.

5.1Features of the VS-5x4Matrix Switcher

Front/Rear panel features of the VS-5x4are shown in Figure 1; the features are described in Table 1.

Figure 1: VS-5x4 Front/Rear Panel Features

￿

5

KRAMER Electronics, Ltd.

 

Page 6
Image 6
Kramer Electronics user manual Kramer VS-5X4 Matrix, Features of the VS-5x4Matrix Switcher