Kramer Electronics user manual Connecting the VS-6EIII 4x4 Video Audio Matrix Switcher

Connecting the VS-6EIII 4x4 Video Audio Matrix Switcher

5Connecting the VS-6EIII 4x4 Video Audio Matrix Switcher

To connect1 the VS-6EIII4x4 Video Audio Matrix Switcher, as illustrated in the example in Figure 2, do the following2:

1.Connect up to four composite video sources (for example, DVD players) to the A, B, C, and D VIDEO BNC IN connectors, and the appropriate AUDIO L and R RCA IN connectors.

2.Connect the VIDEO BNC OUT connectors and the appropriate AUDIO L and R RCA OUT connectors to up to four composite video acceptors, for example:

ƒThe VIDEO OUT 1 to a display and the AUDIO OUT 1 to an AV receiver with speakers

ƒThe VIDEO OUT 4 and the AUDIO OUT 4 to a plasma display

3.Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity (not shown in Figure 2).

1 You do not have to connect all the inputs and the outputs

2 Switch OFF the power on each device before connecting it to your VS-6EIII. After connecting your VS-6EIII, switch on its power and then switch on the power on each device

5