Kramer Electronics manual The Kramer WP-306Wall Plate, WP-306Wall Plate US Version

The Kramer WP-306 Wall Plate

Congratulations on purchasing your Kramer WP-306Wall Plate which is ideal for boardrooms and presentation rooms.

The WP-306is a single-gang wall plate insert.

WP-306 Wall Plate US Version

Figure 1 and Table 1 define the US version of the WP-306Wall Plate.

Figure 1: WP-306 Wall Plate US Version Front and Rear View

Table 1: WP-306 Wall Plate US Version Front and Rear Features

#	Feature	Function
1	ON LED	Lights red when receiving power (when no signal is detected); lights
		green when receiving a signal
2	HDMI IN Connector	Connect to the HDMI digital source
3	IR OUT 3.5mm Mini Connector	Connect to a machine via an IR Emitter. Note, that the IR output is
		only compatible with the SV-552
4	RJ-45 Connector	Connect to the SV-552 Processor/Controller. Note that the WP-306
		requires BC-DGKat524 or BC-DGKat-623 cable for connection
5	DC IN Power Connector	Connect to the 12V power supply (supplied free)

Wiring the Twisted Pair RJ-45 Connector

The US versions of the wall plates are equipped with RJ-45 terminals. Figure 2 defines the STP pinout using a straight pin to pin cable with RJ-45 connectors. For STP cable, cable shielding must be connected/soldered to the connector shield.

Note: For cabling WP-306wall plates, use either Kramer BCP-DGKat524or BCP-DGKat623STP cables.

	EIA /TIA 568B
PIN	Wire Color
1	Orange/White
2	Orange
3	Green/White
4	Blue
5	Blue/White
6	Green

7Brown/White

8Brown

Pair 1	4 and 5
Pair 2	1 and 2
Pair 3	3 and 6
Pair 4	7 and 8

Figure 2: RJ-45 Pinout (U.S.)

WP-306 Wall Plate EU/UK Versions

Figure 3 and Table 2 define the EU/UK version of the WP-306Wall Plate.

Destination England and the rest

Destination Belgium and Germany of Europe (excluding Belgium and Rear panel view Germany)

Figure 3: WP-306 Wall Plate EU/UK Version Front and Rear Views Table 2: WP-306 Wall Plate EU/UK Version Front and Rear Features

#	Feature	Function
1	ON LED	Lights red when receiving power (when no signal is
		detected); lights green when receiving a signal
2	HDMI IN Connector	Connect to the HDMI digital source
3	IR OUT 3.5mm Mini Connector	Connect to a machine via an IR Emitter. Note, that the IR
		output is only compatible with the SV-552
4	Terminal Block	Connect to SV-552. Note that the WP-306requires
		BC-DGKat524 or BC-DGKat-623 cable for connection
5	GROUND Connection	Ring tongue terminal and grounding screw
6	GND +12V 2-pin Power Terminal Block	Connect to the 12V power supply (included)