Krell Industries CD-1 manual F.Operationof The Cd Transport

Care should be taken in selecting the type of cable used to link the CD-1 to your processor.If coaxial cable is to be used it should be 75o1~m,non-capacitive, with a band- width in excess of 10MHzto prevent dropout errors.

CAUTION:The CD-1digital output is not designed to connect directly to any preampor analog signal proces- sor.

F.OPERATIONOF THE CD TRANSPORT

~. Turn t_he CDtransport Onby pressing t.he POWER utton, l-'ress the Open/Closebutton and the transport

drawer will open. Select a disc andplace it in the CD receptacle, label side up. Press the Open/Closebutton and the transport drawer will close. Nowyou are ready to start.

2.Thefunctions of the front panel buttons that control the transport are described below. All of the functions of the CD-Iremainthe same whenused as a dedicated transport.

PLAY

STOP

>l

l<

Starts the disc playingat track 1;

will also restart play of the current track

Stops the disc fromplaying and clears all programming

Forwardtrack select; same as NEXTremote function

Reverse track select; same as PREVremote function

Fast forward scan

Fast reverse scan

NOTE:Whenused as a dedicated transport the analog outputs can still be used to drive a separate system.

6