Evolution 302, 402, 403, 600 and 900 Power Amplifiers
Owner’s Reference, v07.0
| TEL |
Krell Industries, Inc. | FAX |
45 Connair Road | |
Orange, CT | WEBSITE http://www.krellonline.com |
This product complies with the EMC directive (89/336/EEC) and the
IMPORTANT SAFETY INSTRUCTIONS
1.Read Instructions.
2.Keep these Instructions.
3.Heed all Warnings.
4.Follow all Instructions.
5.Do not use this apparatus near water.
6.Clean only with a dry cloth.
7.Do not install near any heat sources such as radiators, heat registers, stoves, or other appa- ratus (including amplifiers) that produce heat.
8.Unplug this apparatus during lightning storms or when unused for long periods of time.
9.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a
10.An Evolution amplifier must be placed on a firm, level surface where it is not exposed to drip- ping or splashing.
11.The ventilation grids on the top of every Evolution amplifier, the ventilation grids on the back of the Evolution 302 amplifier, and the space underneath every Evolution amplifier must be unob- structed at all times during operation. Do not place flammable material above or beneath an Evolution amplifier.
12.Before making connections to an Evolution amplifier, ensure that the power is off and other com- ponents are in mute or
13.THERE ARE NO USER SERVICEABLE PARTS INSIDE AN EVOLUTION AMPLIFIER.
Please contact Krell if you have questions not addressed in this guide.
This product is manufactured in the United States of America. Krell® is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents. CAST™, Evolution CAST™, and Krell Current Mode™ are trademarks of Krell Industries, Inc. All other trademarks are registered to their respective companies.
© 2007 by Krell Industries, Inc. All rights reserved | P/N 309888 |