Krell Industries KSA 150 / 250 owner manual G.Warranty And Service Information

IMPORTANT NOTES REGARDING PROTECTION CIRCUITRY

1.When the Output Protection circuitry has been engaged, allow at least 20 seconds before turning on the amplifier again. Repeated fast cycling of the On/Off switch can damage the amplifier and void the warranty.

2.If the amplifier does not come on following the procedure above, please contact your dealer.

3.There is a circuit breaker on the amplifier real panel. This breaker protects the amplifier in the event of catastrophic failure. If the circuit breaker engages, contact your dealer or the Krell Service Department. Do not attempt to reset the circuit breaker.

G.WARRANTY AND SERVICE INFORMATION

There are no fuses or user-serviceable parts in the KSA-150 or KSA-250. Both amplifiers have a limited warranty of five years from the date of purchase for parts and labor. Return freight is included in the warranty. Please return the warranty car immediately after successful installation and operation are completed.

The warranty for Krell products is valid only in the country to which they were shipped and at the Krell factory in Orange, Connecticut, USA. If there are problems with any of your Krell products, please contact your authorized Krell dealer or the Krell Service Department.

Please do not return any unit to Krell without first having contacted the Krell Service Department and receiving a Return Authorization Number. Units should be shipped in Krell packing. Packing materials may be purchased through the Krell Service Department. Freight charges to the factory or distributor are the responsibility of the customer. Krell or the dealer/distributor will pay return freight charges on warranty repairs.

7