2-14
Chapter 2
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4)
for each of the four IDE devices that the onboard IDE interface supports. Modes
0 through 4 provide successively increased performance. In Auto mode, the
system automatically determines the best mode for each device. The settings
are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
Primary/Secondary Master/Slave UltraDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it
and the operating environment includes a DMA driver (Windows 95 OSR2 or a
third-party IDE bus master driver). If your hard drive and your system software
both support Ultra DMA/33, Ultra DMA/66 and Ultra DMA/100 select Auto to
enable BIOS support. The settings are: Auto, Disabled.
IDE DMA Transfer Access
This item allows users to enable or disable the DMA transfer function of the IDE
hard drive. The settings are: Enabled, Disabled.
SIS OnChip PCI Device
Press <Enter> to enter the sub-menu and the following screen appears:
SIS USB Controller
This setting is used to enable/disable the onboard USB controller. Setting options:
Disabled, Enabled.