![Front Panel Description](/images/new-backgrounds/18174/1817419x1.webp)
Front Panel Description
See Figure 1 on page 9
IMPORTANT
The
1 Power Button
Use this button to switch the
2 Stand-by and Power LED
When the AC power cord is plugged into the wall, the LED illumi- nates in red, indicating that the component is in the
When the power button is pressed, the LED illuminates in blue, indicating that the component is in the operational mode.
The LED flashes red when the protection circuit is activated.
If the LED flashes red when the amplifier is in the
10 | Krell |