DIRECT CONNECT WITH THE PORTA PRINTER PP2000D (CONT.)
The number will be temporarily stored in the Porta Printer 2000D for redial purpose. If you want to use the Redial feature, don’t turn the TDD off after you dial a number. Use [CTRL]+[9] to disconnect from the telephone line and start the [DIAL] function again.
|
|
|
|
|
SHIFT | + | DIAL | CHECK FOR DIAL TONE | Automatically redials the last number. |
|
|
|
|
|
|
|
|
|
|
There is another unique feature that the Porta Printer 2000 provides. If you intend to use the PP2000D behind a PBX or a telephone system that will send a second dial tone to your phone after you have dialed the access code for oubouynd calling (usually an 8 or a 9), the PP2000D will detect this sec- ondary dial tone and dial the rest of the number automatically. This feature is activated by using the + sign between the digits.
SHIFT + DIAL | CHECK FOR DIAL TONE |
9 + 5 5 5 1 2 3 4 |
|
| |
9 + 5 5 5 1 2 3 4 | |
|
|
RETURN
5551234 will only be dialed if there is a second dial tone. The TDD will time out after 5 seconds if there is no dial tone detected.
TONE/PULSE DIALING
Telephone companies offer both pulse and tone dialing. The Porta Printer 2000 will use tone dialing unless you change it. Most tone dialing services will allow you to use rotary (pulse) dialing, but some rotary services will not allow you to use tone dialing.
To set the Porta Printer 2000 for pulse dialing:
CTRL + | PULSE DIAL? Y/N |
|
|
|
|
|
|
|
Y | PULSE DIAL ON | Choose pulse dialing. |
OR |
|
|
|
| Choose tone dialing. |
N | TONE DIAL ON | |
|
|
|
ACOUSTIC/DIRECT CONNECT MODE SELECTION
The Porta Printer 2000 will automatically select Direct Connect mode when you activate the [DIAL] (keyboard dialing) feature. The Porta Printer 2000 will remain in the mode (Acoustic or Direct Connect) you select unitl you change it, or the unit is turned off.
USING THE PP2000D AUTO-ANSWER FEATURE
The Porta Printer 2000D has a
13
