When the desired quantity of espresso has run through, you stop by pressing the coffee key 
or 
(9) (10).
Now the quantity is automatically memorized.
. Hot Water Preparation
You can prepare hot water with this appliance.
•Fill the water tank (1) (2) (3) and start the appliance (4).
•Place the cup beneath the auto cappuccino accessory.
•As soon as the control lamp on the hot water button glows continuously, the appliance is ready to operate.
•Pressing the hot water button 
(15).
•When the desired quantity of water has run through, you stop by pressing the hot water key 
(15).
2. STEAM FUNCTION
The tapping noise which occurs while steam is being produced comes from the intermittent operation of the pump and has no effect on the proper working of the appliance.
Beware: during and after use of the machine, the metallic parts of the auto cappuccino accessory can become burning hot.
. Using the auto cappuccino accessory
The auto cappuccino accessory makes it easy to produce frothy milk for making a cappuc- cino, a latte or a hot chocolate.
•Fill the water tank (1) (2) (3) and start the appliance (4).
•Put the auto cappuccino accessory in place on the steam nozzle.
•Place a cup under the auto cappuccino accessory.
•Pour about 100 ml of very fresh, very cold milk into a container. The milk and its container must be well chilled.
•Insert the flexible tube into this container or directly into the milk carton (17).
Please note the straight cut end of tube must fit inside auto cappuccino device and the irregular end dipped in milk.
•Turn the setting knob to the position “cappuccino” or ‘ latte “.
•When the appliance is ready (operating control lamp glows continuously), press the
steam button 
(16), the operating control lamp blinks.
•When the control lamp of steam button glows continuously again, appliance is ready for steam.
•Press the steam button 
(16).
•Once the froth has been produced, stop by
pressing the steam button 
(16) for the following cleaning operation in order to prevent the milk from drying on the auto cappuccino accessory.
•Place a cup under the auto cappuccino accessory.
•Immerse the flexible tube into a clean container 1/3 full of water.
•Press the steam button 
(16) and when all the water has run through, press the steam key 
(16) to stop.
•Next, clean the auto cappuccino accessory with a damp cloth.
For more thorough cleaning of the auto cappuccino accessory, please refer to the paragraph on maintenance.
. Hot chocolate
•Repeat the same procedure as below after changing the milk with a chocolate beverage you want to heat up.
•If your espresso machine is ready for steam - for 5 min without use, the appliance switches automatically to coffee stand by.
If you wish to make an espresso immediately after steam, the appliance must first be allowed to cool down in order to achieve the correct temperature for preparing an espresso.
•Appliance automatically cools down when pressing the coffee button (one or two cups) - When cooling down, the blue operating control blinks and hot water flows into drip tray. When correct temperature is reached, appliance will run espresso cycle.
