KTI Networks manual Installation Guide, KPOE-800-1P KPOE-800-2P, DOC.090201

Models: KPOE-800-2P KPOE-800-1P

1 17

Page 1

Power over Ethernet Injector

KPOE-800-2P

Image 1

Contents

Modular 8-Port Mid-span Power over Ethernet Injector Installation GuideKPOE-800-1P KPOE-800-2P DOC.090201International United StatesFCC NOTICE TRADEMARKSCE NOTICE Table of Contents 1. Introduction 1.1 Features1.3 Mid-span Injector Function 1.2 Product PanelsModular PoE power upgradability 19 rack mounting support The following figure illustrates the faces of the injectorPoE OUT Power 1.5 Specifications1.4 Model Definition Network PortsLED Indicators Power Module SlotsPower Input Power Consumption2.2 Safety Cautions 2. Installation2.1 Unpacking Desktop Mounting 2.3 Mounting the InjectorRack Mounting Mounting one unit in a rack2. Install the long bracket to the other side of the device Mounting two units in a rack1. Install two short brackets to both sides of each device 3. Mount the device in a 19” rack1. Unplug the AC power cord before any installation 2.4 Installing Power ModuleSpecifications 2.5 Applying AC PowerPower Consumption Power DissipationPort Configuration 3.1 Making Switch Port Connections3. Making LAN Connections IEEE 802.3 std. 10BASE-T 100BASE-TX 1000BASE-TPoE OUT Port Power 3.2 Making Powered Device ConnectionsConnection Distance Safety Protection Incompliant PDShort-circuit 3.3 LED IndicationUnder voltage Function4.2 Application with High Power Requirements 4.1 Application with Low Power Requirements4. Applications