KTI Networks KPOE-800-1P Making LAN Connections, Making Switch Port Connections, Network Cables

3.Making LAN Connections

3.1 Making Switch Port Connections

The mid-span injector is designed to support the following PoE incapable switch port types and the PoE function is transparent and independent to the following port configuration:

IEEE 802.3 std.10BASE-T100BASE-TX1000BASE-T

Port Configuration
Auto-negotiation:	Enable or disable
Transmission speed:	10Mbps, 100Mbps, 1000Mbps
Duplex:	Half duplex, full duplex
Jack Pins:	MDI or MDI-X

Network Cables

10BASE-T: 2-pair UTP Cat. 3, 4, 5, EIA/TIA-568B 100-ohm

100BASE-TX: 2-pair / 4-pair UTP Cat. 5, EIA/TIA-568B 100-ohm

1000BASE-T: 4-pair UTP Cat. 5, Cat.5e, Cat.6, EIA/TIA-568B 100-ohm

To make a switch port connection, the steps are:

1.Find an appropriate network cable for a port connection.

2.Connect one end of the cable to the PoE-incapable switch port.

3.Connect the other end to one available DATA IN jack of the PoE injector.

14