Pioneer DEH-600BT operation manual Clearing memory, Switching the ring tone, 02Operating this unit

Section

02Operating this unit

#This function can be performed even while talking on the phone. In this case, press MULTI-CONTROL to switch to ECHO CANCEL.

Clearing memory

1 Display the function menu.

Refer to Introduction to advanced operations on page 31.

Switching the ring tone

1 Display the function menu.

Refer to Introduction to advanced operations on page 31.

2Use MULTI-CONTROL to select RING TONE in the function menu.

3Push MULTI-CONTROL left or right to select the desired setting.

OFF (off)—1—2—3

Making a call by entering phone number

Important

Be sure to park your vehicle and apply the park- ing brake when performing this operation.

1 Display the function menu.

Refer to Introduction to advanced operations on page 31.

2Use MULTI-CONTROL to select

NUMBER DIAL.

3Push MULTI-CONTROL up or down to select a number.

4Push MULTI-CONTROL left or right to move the cursor to the previous or next po-

sition.

# Up to 24 digits can be entered.

5When you finish entering the number, press MULTI-CONTROL.

Call confirmation appears.

6Press MULTI-CONTROL again to make a call.

7To end the call, press .

2Use MULTI-CONTROL to select

CLR MEMO.

3Push MULTI-CONTROL up or down to select an item.

PH BOOK (phone book)—ALL (delete all memory)—PRESET (preset phone numbers)—

RECENT (call history)

# If you want to clear the entire Phone Book, call history list and preset phone number, select ALL.

4Push MULTI-CONTROL right to deter- mine the item that you want to delete from this unit.

CLEAR MEMORY YES is displayed. Clearing

memory is now on standby.

# If you do not want to clear the memory that you have selected, push MULTI-CONTROL left. The display reverts to normal.

5Press MULTI-CONTROL to clear the memory.

CLEARED is displayed and data on the se- lected item is cleared from this unit’s memory.

Adding the prefix for international calls

You can add the international call prefix “+” to all calls.

1 Display the function menu.

Refer to Introduction to advanced operations on page 31.

2Use MULTI-CONTROL to select ADD+.

3Press MULTI-CONTROL to add the prefix

to all calls.

# To turn off, press MULTI-CONTROL again.

34 En