Pioneer DEH-600BT Receiving PTY alarm broadcasts, Storing the strongest broadcast frequencies

Section

02Operating this unit

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station. Press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# To return to the ordinary display, press

BAND/ESC or LIST.

# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.

Receiving PTY alarm broadcasts

When the emergency PTY code broadcasts, the unit receives it automatically (ALARM ap- pears). When the broadcasting ends, the sys- tem returns to the previous source.

!An emergency announcement can be can- celed by pressing TA.

The function menu is displayed.

3Turn MULTI-CONTROL to select the function.

BSM (best stations memory)—REGIONAL (re- gional)—LOCAL (local seek tuning)—PTY (program type selection)—TRAFFIC (traffic an- nouncement standby)—AF (alternative fre- quencies search)—NEWS (news program interruption)

Notes

!To return to the ordinary display, press BAND/ESC.

!If MW/LW band is selected, you can only se- lect BSM or LOCAL.

Storing the strongest broadcast frequencies

Switching the RDS display

When you tune in an RDS station its program service name is displayed. Switch the display to find out the frequency.

%Press DISP.

Press DISP repeatedly to switch between the following settings:

Program service name—PTY information— Frequency

PTY (program type ID code) information is listed on page 15.

#PTY information and the frequency of the cur- rent station appears on the display for eight sec- onds.

Introduction to advanced operations

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option. Press to se- lect.

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies.

1 Display the function menu.

Refer to Introduction to advanced operations on this page.

2Use MULTI-CONTROL to select BSM in the function menu.

3Press MULTI-CONTROL to turn BSM on. The six strongest broadcast frequencies are

stored in the order of their signal strength.

# To cancel, press MULTI-CONTROL again.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1 Display the function menu.

Refer to Introduction to advanced operations on this page.

2Use MULTI-CONTROL to select LOCAL in the function menu.

12 En