Pioneer DEH-600BT Selecting alternative frequencies, Using Auto PI Seek for preset stations

	Section
Operating this unit	02

3Press MULTI-CONTROL to turn local

seek tuning on.

# To turn local seek tuning off, press MULTI-CONTROL again.

4Push MULTI-CONTROL left or right to set the sensitivity.

FM: LEVEL 1—LEVEL 2—LEVEL 3—LEVEL 4

MW/LW: LEVEL 1—LEVEL 2

The LEVEL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

the same programming. During the search, PI SEEK is displayed and the output is muted.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, the unit can be set to perform PI Seek during pre- set recall.

!The default setting for Auto PI Seek is off. See Switching Auto PI Seek on page 41.

Limiting stations to regional programming

Operating this unit

Selecting alternative frequencies

When the tuner cannot get a good reception, the unit automatically searches for a different station in the same network.

1 Display the function menu.

Refer to Introduction to advanced operations on the previous page.

2Use MULTI-CONTROL to select AF in the function menu.

3Press MULTI-CONTROL to turn AF on.

#To turn off, press MULTI-CONTROL again.

Notes

!Only RDS stations are tuned in during seek tuning or BSM when AF is on.

!When you recall a preset station, the tuner may update the preset station with a new fre- quency from the station’s AF list. No preset number appears on the display if the RDS data for the station received differs from that of the originally stored station.

!During AF search, sound may be temporarily interrupted.

!AF can be turned on or off independently for each FM band.

When AF is used, the regional function limits the selection of stations broadcasting regional programs.

1 Display the function menu.

Refer to Introduction to advanced operations on the previous page.

2Use MULTI-CONTROL to select REGIONAL in the function menu.

3Press MULTI-CONTROL to turn the re-

gional function on.

# To turn off, press MULTI-CONTROL again.

Notes

!Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).

!The preset number may disappear from the display if the tuner tunes in a regional station which differs from the originally set station.

!The regional function can be turned on or off independently for each FM band.

Using PI Seek

If the tuner cannot find a suitable station, or reception status becomes bad, the unit auto- matically searches for a different station with

En 13