Pioneer DEH-600BT Audio Adjustments, Introduction of audio, adjustments, Using the equalizer

Section

03 Audio Adjustments

Introduction of audio	1 Display the audio menu.
adjustments	Refer to Introduction of audio adjustments on
	this page.
1 Press MULTI-CONTROL to display the	2 Use MULTI-CONTROL to select FADER.
main menu.
	# If the balance setting has been previously ad-

2Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to se- lect.

The audio menu is displayed.

3Turn MULTI-CONTROL to select the audio function.

Turn MULTI-CONTROL to switch between the audio functions in the following order. FADER (balance adjustment)—P. EQ (equali- zer recall)—EQ (equalizer adjustment)—EQ (equalizer fine adjustment)—LOUDNESS (loudness)—SUB W1 (subwoofer on/off set- ting)—SUB W2 (subwoofer setting)—HPF (high pass filter)—BASS BOOST (bass boost)

—SLA (source level adjustment)

#You can also select the audio function by pressing AUDIO on the remote control.

#When the sound is muted or attenuated, audio function cannot be performed.

#You can select the SUB W2 only when sub- woofer output is turned on in SUB W1.

#When the subwoofer controller setting is PREOUT:REAR, you cannot switch to SUB W1 (subwoofer on/off setting). (Refer to page 41.)

#When selecting FM as the source, you cannot switch to SLA.

#To return to the display of each source, press BAND/ESC.

#If you do not operate functions within about

30seconds, the display automatically returns to the ordinary display.

justed, BALANCE will be displayed.

3Push MULTI-CONTROL up or down to adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or down, the front/rear speaker balance moves towards the front or rear.

FADER :F15 to FADER :R15 is displayed as the front/rear speaker balance moves from front to

rear.

# FADER :F/R 0 is the proper setting when only

two speakers are used.

# When the rear output setting is SUB W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 41.

4Push MULTI-CONTROL left or right to adjust left/right speaker balance.

Each time MULTI-CONTROL is pushed left or right, the left/right speaker balance moves to- wards the left or right.

BALANCE :L15 to BALANCE :R15 is displayed

as the left/right speaker balance moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization to match the car’s interior acoustic character- istics as desired.

Using balance adjustment

You can change the fader/balance setting so that it can provide the ideal listening environ- ment in all occupied seats.

36 En

Recalling equalizer curves

There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves.

Display Equalizer curve

POWERFUL Powerful

NATURAL Natural