KTI Networks KS-108F manual Installing the Switch

Models: KS-108F

1 14

Page 10

The DC power jack for the AC power adapter is located on the rear of the switch as shown below:

1.Install the switch with the AC power adapter provided.

2.Connect the power adapter cable to the switch before connecting the adapter to the AC outlet.

-10-

Image 10

Contents

KS-108F Ver.B Series Installation Guide10/100 Fast Ethernet Switch with 100FX Connectivity DOC.060302-KS108FBUnited States Ethernet is a registered trademark of Xerox Corp Table of Contents LED Indicators3. Making Network Connections Installing the Switch1. Introduction 1.1 Features 1.2 Specifications KS-108FB-xxx Duplex Series 100FX Port Fiber SpecificationsRef. Distance reference distance when operating on full duplex mode Single Fiber Bi-Di WDM Series2.2 Checking AC Power 2. Installing the Switch2.1 Unpacking 2.3 Installing the Switch 3.2 Making UTP Connections 3.1 Switched Ports3. Making Network Connections Auto-negotiation capable Highest capability 100M Full duplex3.3 Making Fiber Connection 100FX Duplex Selector This selector is used for 100FX port duplex mode selection as follows4.1 LED Panel 4. LED Indicators4.2 Interpretation