ESPAÑOL | 10 |
INSTALLATION INSTRUCTIONS
Installation in a
Foam seal A (adhesive type)
1.Cut the foam seal(adhesive type) to the proper length and attach it to the window stool. Fig.10
espuma de Empaquetadura
ventana la de Soporte
ventana para Sistema
Fig.10
Window kit
26.5 ~ 48
Window stile
Fig.11
Window kit
Window stile
Fig.12
2.Attach the window slider kit to the window stool. Adjust the length of the window slider kit according to the width of window, short the adjustable window kit if the width of window is less than 27 inches.
Open the window sash and place the window slider kit on the window stile. Fig.11
3.Cut the foam seal(adhesive type) to the proper length and attach it on the top of the window. Show as in Fig.12
4.Close the window sash securely against the window.
5.Cut the foam seal to an appropriate length and sealing the open gap between the top window sash and outer window sash. Show as in Fig.13.
ventana la de Soporte
ventana para Sistema
adhesivo) (tipo
Aespuma de Empaquetadura
.13 figura la Véase .ventana la de externo bastidor el y ventana la de bastidor del superior parte la entre cio
hoja doble de bastidores con ventanas en Instalación
Foam seal
Fig.13
INSTALACIÓN DE INSTRUCCIONES
ENGLISH 10