INSTALLATION INSTRUCTIONS
ESPAÑOL13
Remove the drain plug
Fig.23
Water drainage:
-During dehumidifying mode, remove the drain plug from the back of the unit, install the drain connector(5/8 universal female mender) with 3 4 hose(locally purchased). For the models without drain connector, just attach the drain hose to the hole. Place the open end of the hose directly over the drain area in your basement floor. Please refer to Fig.23 & 24.
25 Figura
Continuous drain hose
Fig.24
-When the water level of the bottom tray reaches a predetermined level, the unit beeps 8 times, the digital display area shows P1 . At this time the air conditioning/dehumidification process will immediately stop. However, the fan motor will continue to operate(this is normal).
Carefully move the unit to a drain location, remove the bottom drain plug and let the water drain away(Fig.25). Restart the machine until the P1 symbol disappears. If the error repeats, call for service.
24 Figura
Fig.25
13ENGLISH
.técnico servicio el con contacto en póngase iera,
agua: del Drenaje
INSTALACIÓN DE INSTRUCCIONES
continuo drenaje de Manguera
23 Figura drenaje de tapón el Retire