Kustom owner manual GROOVE 310C Specifications, Model Input Impedance Output Power

GROOVE 310C

Specifications

Model

Input Impedance

Output Power

Frequency Response

Hum & Noise

System Gain

All measurements taken with 1 KHz input signal, Tone controls flat, Gain and Volume Max imum. Measured at effects send output jacks on rear unless noted.

Amplifier Type

Speakers

Footswitch

Power Requirements

Dimensions

Groove 310C	Bass guitar amplifier
200K Ohm
1200 Watts	3 Ohms @ 5% THD
20HZ-20kHz	Actual response is tailored to speakers for accurate acoustical
	response using a bass guitar as input.
-60db	Residual Noise, all level controls 0% (minimum)
27db	Preamp output
15db	Preamp output, Active
25db	Tuner output
27db	Direct output
32db	Power amp gain
Class B	Descrete device Class B amplifier
3 X 10"	Specially Designed Eminence Speakers

Any non-momentary two-button foot switch can be used.

Use any standard tip-ring-sleeve cable

USA/Canada	120VAC/60Hz, 800W nominal
Europe	230VAC/50Hz, 800W nominal
UK	230VAC/50Hz, 800W nominal
Australia	240VAC/50Hz, 800W nominal
Japan	100VAC/50-60Hz, 800W nominal
mm/kg	798 (Height) x 483 (Width) x 508 (Depth), 68 kg
Inches/Pounds	31.5 (Height) x 19 (Width) x 20 (Depth), 138 lbs

9