VII. MINOR PROBLEMS
If any problem occur with your turntable do not hesitate to contact your dealer. It may, however, he convenient to be able to make a few checks and adjustments yourself.
1.Immobile subchassis
-check turntable has been unpacked correclty,
-check tension of tonearm cable
-check clearance between subchassis and baseplate
-check that nothing else is touching subchassis
2.Platter does not rotate
-check mains. Is red light showing on at front panel and is green for 33 and orange for 45 rpm.
-remove platter and check that belt is correclty positioned. When hight is adjusted, edge of subchassis will be pushing belt up, because weight of platter will put subchassis in correct height. Motors should rotate clockwise.
3.Slow start
-clean belt and check oil in bearing. If there is a fault in power supply consult your dealer. Check cable conection.
_________________________________________________________________
STABI REFERENCE T U R N T A B L E | 11 | KUZMA |
