Resetting the phone
If the screen seems frozen and the keypad does not respond to keypresses, reset the phone by completing the following steps:
1.Remove the battery door.
2.Remove and replace the battery.
If the problem persists, return the phone to the dealer for service.
Qualified service
If you are experiencing problems with your phone, see “Getting Help” on page 35. If you have additional questions, contact your service provider for technical support. If the problem persists, return the phone with all accessories and packaging to the dealer for qualified service.
Accessories
Use only
To shop online for a
To order by phone, call (800)
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver. When it is on, it receives and sends out RF energy. Your service provider’s network controls the power of the RF signal.
This power level can range from 0.006 to 0.6 watts.
In August 1996, the U.S. Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for
previously set by both U.S. and international standards bodies in the following reports:
•ANSI C95.1 (American National Standards Institute, 1992)
•NCRP Report 86 (National Council on Radiation Protection and Measurements, 1986)
•ICNIRP (International Commission on
Your phone complies with the standards set by these reports and the FCC guidelines.
Battery and Charger Specifications
Charger | Input | Output | |
|
|
|
|
4.4V | 1A | ||
|
|
|
|
4.5V | 1.5A | ||
|
|
|
|
4.4V | 1A | ||
|
|
|
|
4.5V | 1.5A | ||
|
|
|
|
120VAC / 60Hz | 5.2V | 400mA | |
|
|
|
|
Standard Battery: 3.6V / 975mAh
093 453 037
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA 92121 U.S.A.
Visit us at
To purchase accessories, visit
