Kyocera 5735km, 5755km manual Kyosolutions, Features & Benefits, Technical Specifications

KYOSOLUTIONS

Features & Benefits

AFP/IPDS & SCS PRINTING

IBM host print jobs can be printed on a Kyocera printer or MFP in an Ethernet environment.

FULL IBM HOST CONTROL OF PRINT JOBS

The 5735km/5755km provides bi-directional communication between the host and the printer, via port 9100 and PJL commands.

HIGH SPEED PRINTING, 100+ PPM

Data conversion is accomplished at the 5735km/5755km and sent to the Kyocera printer or MFP via the Ethernet LAN. The 5735km/5755km supports high-speed printing featured in Kyocera printers and MFP’s.

REMOTE PRINTING

The Kyocera printer or MFP can be attached locally or remotely via a WAN or VPN network – The Kyocera printer does not need to be next to the 5735km/5755km.

I-O CUSTOMIZED FINISHING COMANDS

Kyocera finishing features such as duplexing, collating, stapling, folding, hole-punching, etc. can be utilized in a host environment.

I-O’S AWARD WINNING PRINTER EMULATIONS

All AFP/IPDS and SCS functions such as duplex,page offset,COR, fonts, and barcode, are fully supported by the 5735km/5755km.

Technical Specifications

FOR AS/400, ISERIES, ESERVER I5

Protocols:TCP/IP (PPR/PPD, TN5250e, LPR/LPD), SNA, (APPC), AnyNet (SNA over TCP/IP)

IPDS Emulations: IBM 4028 AS1, 3812-2, 3816-1D/S, includes

4312/17 font support

SCS Emulations: IBM 3812-1, 4214, 5224, 5225, 5256

IPDS Towers: Supports all towers

System Requirements: OS/400 Release 3.1 or higher

FOR LAN SYSTEMS

Protocols:TCP/IP (LPR/LPD), IPX/SPX, NetBIOS,

I-O DirectPortTM (Windows 9x Peer-to-Peer)

Supported LAN Hosts: Novell, Windows,Unix

FOR PRINTERS

Ethernet Connection: Port 9100, PCL 3/5e, Auto-sensing 10/100 BaseT

Parallel Connection: Dot-matrix (SCS only), Laser (IPDS/SCS)

FOR S/390 – ZSERIES

Protocols:TCP/IP (PPR/PPD, TN5250e, LPR/LPD), SNA, (APPC), AnyNet (SNA over TCP/IP)

IPDS Emulations: IBM 4028 AS1, 3812-2, 3816-1D/S, includes

4312/17 font support

SCS Emulations: IBM 3812-1, 4214, 5224, 5225, 5256

IPDS Towers: Supports all towers

System Requirements: OS/400 Release 3.1 or higher

GENERAL

5735km Supports 1 Printer

5755km Supports Up To 3 Printers

Printer Ports: One IEEE 1284 bi-directional Centronics parallel port

Power Supply: 100-240V auto-switching (IEC)

Configuration: I-O Configuration Utility requires a Windows 95 or higher PC

For Product Sales:

Specifications and design are subject to change without notice.

Kyocera Mita America, Inc.

225 Sand Road, PO Box 40008

Fairfield, NJ 07004-0008, USA

©2005 Kyocera Mita America, Inc.

For Product Support:

190 North 220 West Suite 100 Salt Lake City, Utah 8116 801.973.6767 www.iocorp.com

www.kyoceramita.com