FS-C5400DN
colour printer for a4 formats
The FS-C5400DN includes:
PRESCRIBE IIcWith the Kyocera page design and control language PRESCRIBE IIc, even complex graphics, logos and forms (multipart forms) can be created independently on the system and saved and updated in the printer. Consequently, integration into print files no longer applies. They are only accessed as required and therefore relieve the load on the network.
The KM NetViewerThe KM NetViewer enables complete monitoring and control of all ECOSYS printers and digital KYOCERA multifunction units from any Windows© PC and thus provides ideal network administration. It also supports the standardised SNMP protocol.
Status Monitor and Command CenterThe Status Monitor shows the current printers condition and gives direct access to the Command Center for the modification of settings that are not contained in the drivers (e.g. network settings, adjustment of sleep mode or blocking of the control panel).
USB Host Interface for USB Flash MemoryPDF files can be printed directly from a USB Flash Memory (e.g. USB stick) via the USB host interface. Documents are selected directly via the printer’s control panel. No computer is required.
With their
The
General |
| Controller |
Technology |
| CPU |
Kyocera ECOSYS Colour Laser Printer |
| PowerPC 750/733 MHz |
Engine speed |
| Memory |
Up to 35 pages per minute in A4 in colour and b/w |
| 256MB RAM, can be increased to 1,280MB RAM |
Resolution |
| (single DIMM slot) as an option |
|
| |
600 x 600 dpi |
| Standard interface |
| USB 2.0 | |
9,600 x 600dpi |
| Fast Ethernet (10/100 |
Duty cycle |
| Controller language |
Max. 150,000 pages per month (A4) |
| Prescribe IIc |
| Emulations | |
Approx. 45 seconds from sleep mode |
| PCL6, PCL5c, PostScript* 3 (KPDL 3), XPS (Windows Vista), |
Time to first page |
| PDF Direct Print, with automatic emulation sensing |
|
|
Memory upgrade
1 slot available for memory upgrade
1 slot (up to 4 GB) for printing forms, fonts, logos, macro storage
USB Flash Memory
Supports direct printing of PDF, XPS, TIFF, JPEG files via USB Host Interface
40GB for forms, fonts, virtual mailbox and more
WarrantyApprox. 8.0 seconds or less in b/w
Approx. 9.0 seconds or less in colour
Dimensions (W x D x H)
345 mm x 518 mm x 510 mm
Weight
Approx. 35 kg (basic unit ready for operation)
Power source 220/240 V, 50/60 Hz
Power consumption Printing: 608 W
Safety standards
GS, TÜV, CE
This unit is manufactured according to ISO 9001 quality standard and ISO 14001 environmental standard.
Paper handlingAll paper capacities quoted are based on 80gsm paper, thickness of max 0.11mm. Please use paper recommended by KYOCERA under normal environmental conditions.
Input capacity
Max. paper capacity incl. options: 2,650 sheets
Duplex unit
Output capacity
Operating systems
All current Windows operating systems, Mac OS X Version 10.2 or higher,
UNIX, LINUX as well as other operating systems
Fonts/barcodes
93 scalable fonts for PCL, 136 scalable fonts for PostScript*, 8 fonts for Windows Vista*, 1 Bitmap font, 45 barcodes (e. g. EAN8, EAN13, EAN128) with automatic generation of checksums as well as support of
Integrated accounting
100 department codes
ConsumablesCapacity of starter toner is black 8,000 pages, and cyan, magenta, yellow is 6,000 pages each in accordance with ISO/IEC 19798
Maintenance Kit:
Max. 500 sheets;
Max. 500 sheets;
Max. 4 x
If the
and developers for 2 years or maximum 300,000 pages (whichever occurs sooner), provided the printer is used and cleaned in accordance with the service instructions.
Windows Vista and the Windows Vista logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
*Kyocera does not warrant that any specifications mentioned will be
KYOCERA MITA Australia | KYOCERA MITA New Zealand |
Ph: 13 KYOCERA | Ph: 0508 KYOCERA |
www.kyoceramita.com.au | www.kyoceramita.co.nz |
KYOCERA MITA Australia Pty Ltd ABN 77 003 852 444
10/2010