Hard Drive | 23
Replacing the Hard Drive
Procedure
1Align the screw holes on the hard-drive cage with the screw holes on the
hard drive.
2Replace the screws that secure the hard-drive cage to the hard drive.
3Connect the power and data cable to the connector on the hard-drive assembly.
4Place the hard-drive assembly on the chassis and slide the hard-drive assembly
into place. Ensure that the slots on the hard-drive cage are secured under the tabs
on the chassis.
5Replace the screws that secure the hard-drive assembly to the chassis.
Postrequisites
1Replace the back cover. See "Replacing the Back Cover" on page 20.
2Replace the stand. See "Replacing the Stand" on page 18.
3Replace the stand cover. See "Replacing the Stand Cover" on page 16.
4Follow the instructions in "After Working Inside Your Computer" on page 13.
book.book Page 23 Monday, October 8, 2012 4:27 PM