Converter Board | 29
10 Converter Board
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.

Removing the Converter Board

Prerequisites
1Remove the stand cover. See "Removing the Stand Cover" on page 15.
2Remove the stand. See "Removing the Stand" on page 17.
3Remove the back cover. See "Removing the Back Cover" on page 19.
Procedure
1Disconnect the cables from the connectors on the converter board.
2Remove the screws that secure the converter board to the chassis.
3Lift the converter board away from the chassis.
1 screws (2) 2 converter board
3cables (2)
1
2
3
book.book Page 29 Monday, October 8, 2012 4:27 PM