Speakers | 53
Replacing the Speakers
Procedure
1Align the screw holes on the speakers with the screw holes on the middle frame.
2Replace the screws that secure the speakers to the middle frame.
3Route the speakers cable through the routing guides.
4Connect the speakers cable to the connector (SPEAKER) on the system board.
Postrequisites
1Replace the system-board shield. See "Replacing the System-Board Shield" on
page 36.
2Replace the B-CAS card. See "Replacing the B-CAS Card" on page 28.
3Replace the back cover. See "Replacing the Back Cover" on page 20.
4Replace the stand. See "Replacing the Stand" on page 18.
5Replace the stand cover. See "Replacing the Stand Cover" on page 16.
6Follow the instructions in "After Working Inside Your Computer" on page 13.
book.book Page 53 Monday, October 8, 2012 4:27 PM