Antenna Modules | 39
14 Antenna Modules
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.

Removing the Antenna Modules

Prerequisites
1Remove the stand cover. See "Removing the Stand Cover" on page 15.
2Remove the stand. See "Removing the Stand" on page 17.
3Remove the back cover. See "Removing the Back Cover" on page 19.
4Remove the system-board shield. See "Removing the System-Board Shield" on
page 35.
Procedure
1Disconnect the antenna cables from the connectors on the wireless Mini-Card.
2Make a note of the antenna cables routing and remove them from the
routing guides.
3Peel the antenna modules from the chassis.
1 antenna cables (2) 2 antenna modules (2)
3 wireless Mini-Card
2
1
3
book.book Page 39 Monday, October 8, 2012 4:27 PM