TV-Tuner Card (Optional) | 43
Replacing the TV-Tuner Card
Procedure
CAUTION: To avoid damage to the TV-tuner card, ensure that there are no cables
under the TV-tuner card.
1Align the notch on the TV-tuner card with the tab on the system-board connector.
2Insert the TV-tuner card at a 45-degree angle into the system-board connector.
3Press the other end of the TV-tuner card down and replace the screw that secures
the TV-tuner card to the system-board connector.
4Connect the TV-tuner-card cable to the connector on the TV-tuner card.
Postrequisites
1Replace the system-board shield. See "Replacing the System-Board Shield" on
page 36.
2Replace the back cover. See "Replacing the Back Cover" on page 20.
3Replace the stand. See "Replacing the Stand" on page 18.
4Replace the stand cover. See "Replacing the Stand Cover" on page 16.
5Follow the instructions in "After Working Inside Your Computer" on page 13.
book.book Page 43 Monday, October 8, 2012 4:27 PM