30 | Converter Board
Replacing the Converter Board
Procedure
1Align the screw holes on the converter board with the screw holes on the chassis.
2Replace the screws that secure the converter board to the chassis.
3Connect the cables to the connectors on the converter board.
Postrequisites
1Replace the back cover. See "Replacing the Back Cover" on page 20.
2Replace the stand. See "Replacing the Stand" on page 18.
3Replace the stand cover. See "Replacing the Stand Cover" on page 16.
4Follow the instructions in "After Working Inside Your Computer" on page 13.
book.book Page 30 Monday, October 8, 2012 4:27 PM