System-Board Shield | 35
12 System-Board Shield
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.

Removing the System-Board Shield

Prerequisites
1Remove the stand cover. See "Removing the Stand Cover" on page 15.
2Remove the stand. See "Removing the Stand" on page 17.
3Remove the back cover. See "Removing the Back Cover" on page 19.
Procedure
1Remove the screws that secure the system-board shield to the chassis.
2Carefully lift the system-board shield and turn it over.
1 screws (5) 2 system-board shield
2
1
book.book Page 35 Monday, October 8, 2012 4:27 PM