38 | Antenna-In Connector
Replacing the Antenna-In Connector
Procedure
1Slide the antenna-in connector into the slot on the system-board shield.
2Replace the hex nut that secures the antenna-in connector to the
system-board shield.
Postrequisites
1Replace the system-board shield. See "Replacing the System-Board Shield" on
page 36.
2Replace the back cover. See "Replacing the Back Cover" on page 20.
3Replace the stand. See "Replacing the Stand" on page 18.
4Replace the stand cover. See "Replacing the Stand Cover" on page 16.
5Follow the instructions in "After Working Inside Your Computer" on page 13.
book.book Page 38 Monday, October 8, 2012 4:27 PM