56 | Fan
Procedure
1Disconnect the fan cable from the connector (FANC1) on the system board.
2Remove the fan cable from the routing guide on the fan.
3Remove the screws that secure the fan to the chassis.
4Lift the fan along with its cable away from the chassis.
Replacing the Fan
Procedure
1Align the screw holes on the fan with the screw holes on the chassis.
2Replace the screws that secure the fan to the chassis.
3Route the fan cable through the routing guide on the fan.
4Connect the fan cable to the connector (FANC1) on the system board.
Postrequisites
1Replace the system-board shield. See "Replacing the System-Board Shield" on
page 36.
2Replace the back cover. See "Replacing the Back Cover" on page 20.
3Replace the stand. See "Replacing the Stand" on page 18.
4Replace the stand cover. See "Replacing the Stand Cover" on page 16.
5Follow the instructions in "After Working Inside Your Computer" on page 13.
1 screws (2) 2 fan
3 fan cable
1
23
book.book Page 56 Monday, October 8, 2012 4:27 PM