26 | Optical Drive
4Carefully pry the optical-drive bezel and remove it from the optical-drive assembly.
5Remove the screws that secure the optical-drive bracket to the optical drive.
6Remove the optical-drive bracket.
Replacing the Optical Drive
Procedure
1Align the screw holes on the optical-drive bracket with the screw holes on the
optical drive.
2Replace the screws that secure the optical-drive bracket to the optical drive.
3Align the tabs on the optical-drive bezel with the slots on the optical-drive
assembly and snap the optical-drive bezel into place.
4Slide the optical-drive assembly into the optical-drive bay until it is fully seated.
5Replace the screw that secures the optical-drive assembly to the chassis.
6Connect the power and data cable to the connector on the optical-drive assembly.
Postrequisites
1Replace the back cover. See "Replacing the Back Cover" on page 20.
2Replace the stand. See "Replacing the Stand" on page 18.
3Replace the stand cover. See "Replacing the Stand Cover" on page 16.
4Follow the instructions in "After Working Inside Your Computer" on page 13.
1 optical-drive bezel 2 optical drive
3 optical-drive bracket 4 screws (2)
12
3
4
book.book Page 26 Monday, October 8, 2012 4:27 PM