82 | Infrared (IR) Receiver
Replacing the Infrared Receiver
Procedure
1Place the IR receiver in position on the display bezel and snap the IR receiver
into place.
2Align the screw holes on the chassis with the screw holes on the middle frame.
3Replace the screws that secure the chassis to the middle frame.
4Route all the cables through the routing guides on the chassis.
Postrequisites
1Replace the system board. See "Replacing the System Board" on page 71.
2Replace the system-board shield. See "Replacing the System-Board Shield" on
page 36.
3Replace the fan. See "Replacing the Fan" on page 56.
4Replace the converter board. See "Replacing the Converter Board" on page 30.
5Follow the instructions from step 3 to step 5 in "Replacing the Hard Drive" on
page 23.
6Follow the instructions from step 4 to step 6 in "Replacing the Optical Drive" on
page 26.
7Replace the back cover. See "Replacing the Back Cover" on page 20.
8Replace the stand. See "Replacing the Stand" on page 18.
9Replace the stand cover. See "Replacing the Stand Cover" on page 16.
10 Follow the instructions in "After Working Inside Your Computer" on page 13.
book.book Page 82 Monday, October 8, 2012 4:27 PM