Procedure
NOTE: Make a note of the cable routing before disconnecting the cables from the system board.
NOTE: Your computer’s Service Tag is stored in the system board.
You must enter the Service Tag in the BIOS after you replace the system board.
1Disconnect all the cables from their connectors on the system board.
2Remove the screws that secure the system board to the chassis.
3Lift the system board at an angle and then slide it to release the connectors on the system board from the slots on the chassis.
4Remove the system board away from the chassis.
2
1
1 system board | 2 screws (5) |
|
|
70 System Board