User Guide for the Kyocera K122 Phone 29
You cannot edit these numbers.
To make a call to an emergency number from
a locked phone, you must dial the number
(including area code) exactly as it was stored
in Emergency Numbers.

Erasing all contacts

You can erase all entries from your
Contactsdirec tory.
1. Select Menu Settings Security.
2. Enter your four-digit lock code.
3. Select Erase Contacts.
4. Select Yes. A message appears:
“Erase ALL contacts?”
5. Select Yes and press to erase allcontacts.
Network settings

Switching between phone lines

Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
Note: You must first establish a second phone
line with your service provider. Not all carriers
provide this service. Check with your service
provider for availability.
To switch between phone lines:
1. Select Menu Settings Network
SetPhone Line.
2. Select one of the two lines and press .

Connecting to a TTY/TDD device

Note: TTY/TDD service may not be available
onyour phone. Ch eck with your service provider
for availability.
You can connect the phone to a TTY device for th e
hearing impaired. Note: Enable TTY only when
using the phone with a TTY device.
1. Connect the TTY device to the phone.
2. Enter from
yourkeypad .
3. Press to select the TTY option.
4. Press to clear the message.
5. Press down to highlight an option.
6. Press .
Note: TTY/TDD service may not be available.
Check with your service provider for
moreinfo rmation.
82-G1675-1EN.book Page 29 Tuesday, September 12, 2006 2:50 PM