Kyocera KX16 manual Controlling network roaming, Specifying digital or analog mode

Controlling network roaming

Specifying digital or analog mode

Depending on services available from your service provider, you may set the phone to either digital or analog mode. This is useful if you are in an area that borders on digital service and the automatic feature is causing the phone to keep switching between modes.

1.Select Menu → Settings → Network → Digital/Analog.

2.Select an option and press .

–Automatic automatically switches the phone between digital and analog.

–Analog only sets the phone to work in analog mode only.

–Analog call forces a call into analog mode for the duration of the next call.

–Digital only sets the phone to work in digital mode only.

Turning roaming on or off

This setting allows you to control the phone’s roaming feature by specifying which signals the phone will accept.

1.Select Menu → Settings → Network → Roam Option.

2.Select an option and press .

–Automatic (recommended setting) accepts any system the phone service provides.

–No roaming prevents you from making or receiving calls outside of your home service area.

Note: If your phone has more than one setting for Automatic, contact you service provider to determine which one to use.

14 Making and Answering Calls