Kyocera KX9e manual Installing the battery, Charging the battery, Recharging the battery

1GETTING STARTED

Installing the battery

Your Kyocera KX9e phone comes with a removable lithium ion (LiIon) battery.

Fully charge the battery before using the phone.

To install the battery:

1.Hold the phone face

down.

2.Toward the bottom of the phone there is a recess

to aid you in opening the battery door. Use your fingernail to pull the battery door away.

3. Place the battery in the phone casing with the metal contacts toward the bottom of the phone.

4. Place the battery door tabs in the openings near the top of the phone.

5.Press the battery door until it clicks into place.

Note: Before you remove the battery, make sure the phone is powered off.

Charging the battery

You must have at least a partial charge in the battery to make or receive calls.

To charge the battery:

1.Connect the AC adapter to the jack on the bottom

of the phone.

2.Plug the adapter into a wall outlet.

The battery icon in the upper-right corner of the screen tells you whether the phone is:

•Charging (the icon is animated)

•Partially charged

•Fully charged

Note: The battery will not charge if you use the phone while it is connected to an AC adapter.

Recharging the battery

You can safely recharge the battery at any time, even if it has a partial charge.

User Guide for the Kyocera KX9e Phone 1