CC 2000 Centrifugal Pump Controller | 5 |
CC 2000 Pump Controller
▼ ▼
For SC Series Pumps
Accommodates Arrays with two to twelve
▼ ▼ ▼ ▼ ▼ ▼
Maximum Power Point Tracking
Self Programming Operation
Current Boosting
Self Diagnostic
Simplified Control and Troubleshooting
LED Indicators Provide Convenient Information about Voltages, Switch and Sensor Status and Overload Conditions
The CC 2000 pump controller is designed to connect solar modules to Kyocera Solar’s SC series submersible motors and centrifugal pumps. The controller provides current boosting combined with true Maximum Power Point Tracking (MPPT) of the solar modules. The pump controller’s microprocessor constantly monitors the incoming solar power and boosts current to operate the solar modules at their peak power point and maximize pump output. The controller is entirely
The CC 2000 controller will accommodate two to twelve solar modules in series. Any combination of modules can be used as long as the total Open Circuit Voltage (VOC) does not exceed 300 Volts. Strings of modules can be wired in parallel to maximize daily water production.
In addition to solar modules, the controller will also operate from 24 to 144 Volt battery banks for use in a broad range of applications. The CC 2000 controller is only intended for use with Kyocera Solar’s SC series of motors.
The controller’s unique design simplifies control and troubleshooting of pumping systems. Inputs are provided for remote switches and Kyocera Solar’s unique water level sensor. Indicators provide convenient information about voltages, switch and sensor status, and overload conditions.
Kyocera Solar’s newly designed pump controller is user friendly. It is designed to provide maximum power under varying conditions and requires no programming by the user. We are proud to introduce the Kyocera Solar line of pump controllers and are confident you will be satisfied.
Model CC 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 85224 Shipping Weight: 10.0 lbs.(4.54 kg)
Description | Value | |
Maximum Ambient Temperature | 50° C | |
Minimum Ambient Temperature | ||
Maximum Solar/Input Voltage (total VOC @ | 300 Volts | |
Max. Output Current - Current Boost Mode |
|
|
(input voltage greater than output voltage) | 14 Amps | |
Max. Output Power - Current Boost Mode |
|
|
(input voltage greater than output voltage) | 2000 Watts | |
Input Current Limiting | 15 Amps | |
High Temperature Protection |
|
|
(shutdown temperature at heatsink) | 85° C | |
Solar and Pump Wire Sizes | 0.5 - 16 mm2 | (6 - 20 AWG) |
Sensor and Remote Switch Wire Sizes | 0.2 - 2.5 mm2 | (14 - 24 AWG) |
■ Solar Water Pumping Products Catalog ■
