3.6 Making Default Settings
3-43
3.6.2 KC-GL Pen Width and Color
The KC-GL emulation mode enables you to set the pen widths in dots, individual pen colors
for pen numbers 1 to 8, and the KC-GL page size.
1
11
1Press the MENU key.
2
22
2Press the U or V key repeatedly until Emulation appears on the message display.
3
33
3If the current emulation is other than KC-GL, press the ENTER key. A blinking
question mark (?) appears.
4
44
4Press the U or V key repeatedly until KC-GL appears. Press the ENTER key.
5
55
5Press the Z key to move to the >KC-GL Pen Adjust> submenu. To change the
pen width and/or pen color, press the ENTER key. A blinking question mark (?)
appears.
6
66
6Press the U or V key repeatedly until the desired pen number of 1 to 8 appears.
When the desired pen number is displayed, press the ENTER key.
7
77
7To change the pen width, press the Z key, then press the ENTER key. A blinking
cursor appears at the width value.
8
88
8Press the U or V key repeatedly until the desired pen width in dots (00 to 99)
appears. When the desired pen width is displayed, press the ENTER key.
9
99
9To set the pen color, press the U or V key. To change the pen color, press the
ENTER key. A blinking question mark (?) appears.
10
1010
10 Press the U or V key repeatedly until the desired pen color (Black, Red, Green,
Yellow, Blue, Magenta, Cyan, White) appears. When the desired pen color is
displayed, press the ENTER key.
11
1111
11 To set the KC-GL page size, press the Y key twice, then Press the U or V key until
>KC-GL Page Set is displayed.
Emulation >
KC-GL
>KC-GL Pen
Adjust ? Pen (1)
>>Pen(1) Width
02 dot(s)
>>Pen(1) Color
? Black